QuietSound™ Acoustical Underlayment
QuietSound™ Acoustical Underlayment is the premium solution to abate noise transmission from foot traffic and electronics in multi-story buildings. Acting as a crack suppression membrane, QuietSound™ resists compression while offering superior underfoot comfort. Unlike natural cork and foam, this recycled rubber product will remain permanently resilient and impervious to the elements.
Whether used as a floating floor or bonded to the subfloor, QuietSound™ acoustic floor underlayment provides superior sound insulation that creates undisturbed living and working conditions for decades.
Why is QuietSound™ the premier solution to abate noise transmission from foot traffic and electronics in multi-story buildings? It all starts with resilience. QuietSound™ resists permanent compression while offering excellent underfoot comfort. This acoustical rubber underlayment properly deflects compression when put under stress (e.g., the pressure of a footstep) and returns to its original form when not under stress. Cork and foam underlayment products are not resilient and often remain permanently compressed just after a year of use. As a result, the sound insulation for these inferior underlayment products will decline significantly and rapidly following initial use.
QuietSound™ acoustical underlayment is suitable for all conventional subfloors and floor coverings. QuietSound™ is easy to install using QuietGrip™ adhesive or an approved rubber bonding adhesive.
Product Specifications
RATINGS PER THICKNESS | ||||||
---|---|---|---|---|---|---|
Item | Standard |
RATING
|
||||
Water Vapor Transmission Rate |
ASTM E96 | 4.7 g/m2/24hr | ||||
Density | ASTM D3576, Section 12 | 45 lbs./cubic foot | ||||
Compression Resistance |
ASTM D3575, ASTM D3676 | 65 cubic feet | ||||
Compression Set | ASTM D395 | 10.1% of original deflection | ||||
Coefficient of Friction | ASTM D1894 | 0.84 wet | ||||
Flammability | Pill Test | Passed | ||||
Durometer | ASTM D2240 |
|
||||
Tensile Strength | ASTM D395 |
|
||||
Volatile Organic Compounds |
CDPH v1.2 | > 0.5mg/m3 | ||||
Sound Transmission Class (STC) | ASTM E90, ASTM E492 | Visit our acoustical library of test reports at www.usrubber.com/acoustical-testing |
||||
Impact Insulation Class (IIC) |
ASTM E90, ASTM E492 | Visit our acoustical library of test reports at www.usrubber.com/acoustical-testing |
Installing Acoustical Underlayment
Proper installation of QuietSound™ Acoustical Underlayment is the responsibility of our customers. Unapproved adhesives can result in permanent damage and are not covered under our 25-year limited warranty. A premium grade adhesive, such as QuietGrip™, with high moisture resistance (up to 8 lbs./90% RH) that is specially formulated to provide maximum bond strength while helping to minimize plank shrinkage, is required for the offer the highest caliber tack and peel strength.
